10 mm Toughened Glass Door in Glass Partition Wall With Crittall in Black RAL 9005.jpg

DIY GLASS PARTITION AND DOORS

Welcome , and Congratulation. The fact you are here might mean, that you are thinking about installing your new glass partition wall or glass door yourself . And this is great .

Either you are experienced tradesman, or brave DIY hobbyist, we will guide you step by step how to install your new Glass Partition Wall or Glass Door.

So, without further ado, let's get to it .

Get your free assistance now

WE WANT TO WORK WITH YOU.

Credentials

Yes, this is a great question .

Are we even competent enough?

Building a Glass Partition Wall involves using a high speed power tools, and handling a 10mm Toughened glass leaves might be quite tricky too .

Well, our most senior executive serves the construction industry since late 70s, and is in glass niche since early 90s. Your, will be guided by our instructor with over 15 years of field experience .

First Question

The first question we would ask is : Are you 100% sure that the Glass Partition wall or Glass Door is what you want? Is that the right solution for you ? If yes, we can move to the next step which is assessing location where you wish to have it installed. For example: Most likely the route to the exact place is easy enough with aluminium framework, but carrying heavy panel of Toughened Glass up the stairs , could be sometimes problematic .

Next Step

So what would be the next step you might ask. Well, first of all, we need the sizes of your opening. Meaning, where your Glass Partition Wall or Glass Door would be installed. You need to measure the width at the top and bottom, and the height on the left and right. If the opening is wider than 2.5 m ( 8 feet) you’d need to measure the height on the left , right and in the middle of the opening .If any of this is confusing, don’t worry, you can always get in touch with us and we’ll assist you with any aspect during the process from taking the measurements to the end of installation.

Ask Now